INSTRUCTIONS:
 - From each package of rick rack, cut a piece 36" long.
- Stack the three lengths on top of one another, matching the "V"s. Secure them by stapling the ends together.
- Tape this end to a work table.
- Fan out the rick rack (See photo 1).
- Begin braiding by folding the left strip over the center, then the right over the center, in a braiding fashion, interlocking the "V"s as you fold (See photo. 2).
- Continue to braid until a three-dimensional braid begins to form (looks like a tube). Do entire length.
- Wrap tape tightly around ends.
Measure wrist, add 1", and cut from braided length. Tape ends again.
 - Cut off excess tape and rick rack.
- Squeeze glue into open end of barrel, push taped end of braid into glue as far as it can go. Allow to dry.
- Add jump rings to each barrel.
- Add closures to each ring.
- Repeat steps 9-12 for necklace.
- Enjoy!
Make many necklaces in varying lengths and colors, and wear several at once for another fashion look!
|